‘Clear and obvious hazard’ leads to fine after worker falls

February 15, 2023

A company has been fined after a worker fell into a moulding pit and suffered a broken rib.

The worker, an employee of Peel Jones Copper Products Limited, had opened up the company’s site at Maynard Foundry, Kilton Lane, Saltburn on 27 August 2021. The lights inside the company’s casting room were currently off and the worker had to walk from one side to the other in order to turn them on. While doing this, the worker lost their bearings and fell into one of the company’s pits, suffering a broken rib.

The HSE found the company had not properly assessed the risk created by the pits, and that suitable edge protection or covers for the pits had not been provided.

Following a visit by a HSE inspector in 2018, Peel Jones Copper Products Limited had been served with an Notification of Contravention, requiring the company to provide improved protection around the moulding pit. The company had installed edge protection but this was later removed as larger moulds began to be used by the firm. Prior to the incident in August 2021, there had been a previous incident when an employee fell into one of the company’s pits, though there were no significant injuries on that occasion.

Peel Jones Copper Products Limited, of Kilton Lane, Carlin How, Saltburn, Cleveland pleaded guilty to breaching Section 2(1) of the Health and Safety at Work etc Act 1974. They were fined £26,666 and ordered to pay £4,105 in costs.

HSE inspector Stephen Garner said: “The company failed to take suitable measures to prevent employees falling into its moulding pits. This was a clear and obvious hazard that was known to the company. There had been a previous incident and HSE had already taken enforcement action in relation to this particular risk in 2018. It should be immediately foreseeable that harm is likely to result from a system whereby employees are required to walk past unprotected fall edges in the dark in order to open up a site.”

This is valid as of 15th February 2023.

A company has been fined after a worker fell into a moulding pit and suffered a broken rib.
The worker, an employee of Peel Jones Copper Products Limited, had opened up the company’s site at Maynard Foundry, Kilton Lane, Saltburn on 27 August 2021. The lights inside the company’s casting room were currently off and the worker had to walk from one side to the other in order to turn them on. While doing this, the worker lost their bearings and fell into one of the company’s pits, suffering a broken rib. The HSE found the company had not properly assessed the risk created by the pits, and that suitable edge protection or covers for the pits had not been provided. Following a visit by a HSE inspector in 2018, Peel Jones Copper Products Limited had been served with an Notification of Contravention, requiring the company to provide improved protection around the moulding pit. The company had installed edge protection but this was later removed as larger moulds began to be used by the firm. Prior to the incident in August 2021, there had been a previous incident when an employee fell into one of the company’s pits, though there were no significant injuries on that occasion. Peel Jones Copper Products Limited, of Kilton Lane, Carlin How, Saltburn, Cleveland pleaded guilty to breaching Section 2(1) of the Health and Safety at Work etc Act 1974. They were fined £26,666 and ordered to pay £4,105 in costs. HSE inspector Stephen Garner said: “The company failed to take suitable measures to prevent employees falling into its moulding pits. This was a clear and obvious hazard that was known to the company. There had been a previous incident and HSE had already taken enforcement action in relation to this particular risk in 2018. It should be immediately foreseeable that harm is likely to result from a system whereby employees are required to walk past unprotected fall edges in the dark in order to open up a site.”

This is valid as of 15th February 2023.

[ssba-buttons]

You May Also Be Interested In

Comments are closed.

✉ Sign up to the Barbour Newsletter

Free downloads, advance notice of webinars, product updates and perks – all straight to your inbox.

  • Barbour EHS may from time to time send updates about Barbour products and services. By providing your contact information you consent to being contacted for direct marketing purposes by Barbour EHS. Please ensure you review our Privacy Policy.