Siemens Gamesa Renewable Energy Ltd, has been fined after an agency worker fell 1.8 metres from a blade platform.
Leeds Magistrates’ Court was told that, on 11 November 2017, the 30-year-old was working inside one of the turbine blades at the company’s blade factory in Hull. Inside the blade is a midway platform referred to as the “web”. He was standing on the web, vacuuming the inside of the blade to clean off fibreglass dust and deposits. As he approached the edge of the web, towards the end of the turbine blade, he fell a distance of 1.8 meters. He sustained injuries including a broken collarbone, 10 broken ribs, a broken wrist and a punctured lung and he was off work for two months.
Investigating, the HSE found that Siemens Gamesa Renewable Energy Ltd had provided a ladder to access to the “web” but they had not provided any fall protection either side of the ladder. The company have provided edge protection following the incident and after risk assessing the task the company have identified a method whereby there is no need to work at height, they can simply rotate the blade 90 degrees.
Siemens Gamesa Renewable Energy Ltd of Faraday House, Sir William Siemens Square, Frimley, Camberley, Surrey pleaded guilty to breaching Regulation 6 (3) of the Work at Height Regulations 2005. The company has been fined £533,334 and ordered to pay £16,274 in costs.
After the hearing, HSE inspector Denise Fotheringham commented: “Falls from height often result in life-changing or fatal injuries. In most cases, these incidents are needless and could be prevented by properly planning the work to ensure that effective preventative and protective measures are in place such as edge protection or barriers built to the correct standard.
“This incident could have easily been prevented if the company had installed adequate edge protection to prevent falls”.
This is valid as of 1st April 2021.
Siemens Gamesa Renewable Energy Ltd, has been fined after an agency worker fell 1.8 metres from a blade platform. Leeds Magistrates’ Court was told that, on 11 November 2017, the 30-year-old was working inside one of the turbine blades at the company’s blade factory in Hull. Inside the blade is a midway platform referred to as the “web”. He was standing on the web, vacuuming the inside of the blade to clean off fibreglass dust and deposits. As he approached the edge of the web, towards the end of the turbine blade, he fell a distance of 1.8 meters. He sustained injuries including a broken collarbone, 10 broken ribs, a broken wrist and a punctured lung and he was off work for two months. Investigating, the HSE found that Siemens Gamesa Renewable Energy Ltd had provided a ladder to access to the “web” but they had not provided any fall protection either side of the ladder. The company have provided edge protection following the incident and after risk assessing the task the company have identified a method whereby there is no need to work at height, they can simply rotate the blade 90 degrees. Siemens Gamesa Renewable Energy Ltd of Faraday House, Sir William Siemens Square, Frimley, Camberley, Surrey pleaded guilty to breaching Regulation 6 (3) of the Work at Height Regulations 2005. The company has been fined £533,334 and ordered to pay £16,274 in costs. After the hearing, HSE inspector Denise Fotheringham commented: “Falls from height often result in life-changing or fatal injuries. In most cases, these incidents are needless and could be prevented by properly planning the work to ensure that effective preventative and protective measures are in place such as edge protection or barriers built to the correct standard. “This incident could have easily been prevented if the company had installed adequate edge protection to prevent falls”. This is valid as of 1st April 2021.
[ssba-buttons]
You May Also Be Interested In
Tank truck manufacturer and director fined a combined $680,000 after workers fatally injured
EPA announces $1.4 million settlement over alleged chemical accident prevention violations
Fines issued after dockyard scaffolder seriously hurt
